This steam boiler project for a UK based textiles manufacturer involved the design, manufacture and retrofit of a bespoke boiler economiser in a horizontal orientation fitted directly onto the boiler flue exhaust flange with inlet / outlet gas side transitions to suit. The 8,000 kg/hr steam boiler runs at 8 bar g and […]
Case Study: Waste Heat Recovery System for an Activated Carbon Regeneration Furnance
A UK-based edible oils processing plant uses activated carbon in order to clean up various contaminants contained within the oils for product quality reasons. The spent carbon is regenerated on-site in a gas fired rotary hearth furnace and the hot exhaust gases (700°C) from the furnace are a valuable high grade source of waste heat. […]
Case Study: 100KW Gas Fired Thermal Oil Heater
While the capital cost of electrical thermal oil heaters is much less than gas fired ones the running costs of the oil fired units are far less than the electrical units. If required process temperatures are above 150ºc then it is better to use thermal oil heaters rather than steam boilers. Often the heat load […]
+44 (0)161 339 3049