Heat recovery unit installed on the exhaust of a 2MW heavy fuel oil fired Mirlees V16 engine which provided the main power supply to Antigua. The unit generated high pressure hot water at 140 degrees, which was used to replace electrical oil tank and outflow heaters and so save an otherwise high parasitic load.
[table caption=”Case Study 7″ width=”500″ colwidth=”30|40|30″ colalign=”center|center|center”]
Capital Cost, , £40K
Savings, , 300 KW
Payback, , 10 Months
[/table]
When a UK-based textiles manufacturing plant were looking to increase the energy efficiency of its twin yarn drying process lines ThermTech designed, manufactured and installed a waste heat recovery system which met their needs. The two dryers originally exhausted both hot and humid air to atmosphere at around 140°C. A simple, self-controlling and cost effective […]
When Noble’s Hospital on the Isle of Man was looking to reduce operating costs ThermTech designed, manufactured and retrofitted three bespoke boiler economisers to help them do this. The hospital had two 6,000 kg/hr and one 4,000 kg/hr natural gas fired steam boilers running at 10 bar g each. The Solution Three bespoke boiler economisers […]
ThermTech were asked to design, manufacture and retrofit two bespoke steam boiler economisers to the boilers for a UK based specialty chemicals production facility to help further improve the energy efficiency of the site. The two natural gas fired boilers located at the site’s boiler house are each designed to provide a maximum of […]
+44 (0)161 339 3049